Best Exposed Beam Lighting Things For 2022

One of the most difficult chores for individuals who want to adorn their home on their own is lighting a roof with exposed beams. In reality, it’s not always easy to figure out what this kind of architecture can do, so you start to freak out.

Lighting a beamed roof 

In actuality, we should start with the notion that a wooden roof should be highlighted rather than hidden, therefore a simple lighting system that runs from top to bottom is assumed. The discussion can also include sloping roofs that don’t have to be held up by beams, as well as vaulted or frescoed roofs that aren’t always held up by them.

What style do you prefer: classic or contemporary?

First and foremost, determine whether the piece of furniture is in a classic/rustic or contemporary/industrial style. In the first situation, you have greater leeway in terms of using romantic chandeliers, candlesticks, and sconces. Others prefer to use simply floor lamps and floor systems instead of hanging anything from the ceiling. It’s a simple approach to make the lighting gentle and distinctive, highlighting not only the roof but also the exposed brickwork on the walls.

Lighting a beamed roof Only in low light

In the second case, however, the strategy to use is that of phantom lighting, with lighting bodies that highlight the architecture but are as minimal or hidden as possible. It’s as if the light was there, but we don’t understand where it comes from.

Lighting a roof with exposed beams: contemporary solutions

First of all, we assume that if you have exposed beams, you absolutely have to light them. It is not entirely true that the light should be placed at eye level if the ceiling is very high. Illuminating two layers are needed in this case. One is “architectural,” which highlights the ceiling, and another is “decorative,” which lights up different daily tasks.

To improve the beams, it is important to use technical systems that direct the light from bottom to top. The lighting systems available on the market can be recessed or not.

Obviously, you understand that the downlights will be inserted into the structure (beams, ceiling, or plasterboard), which is not always possible, especially if you do not intend to “drill” the ceiling or the wood beams.

Non-recessed ones can be surface spotlights or electrified tracks, attached to the perimeter walls with metal tie rods capable of supporting spotlights angled to where needed. These solutions are more common in a home environment and are easier to manage if you don’t know how to proceed. The lighting of a beamed roof. Spotlights between the beams embedded in the perimeter wall.

rig lighting
rig lighting

Surface floodlights

There are tons of options for this type. It is important that the projectors are minimalist, camouflaged, or even hidden. Look for the least visible, but effective, spots on the attic and make sure they illuminate the most scenic part of the roof. If you want to insert adjustable spotlights, buy the smaller ones so as not to weigh down the scenery.

Electrified tracks

Here too, you have several options. From the suspended track fixed to the perimeter walls to the track to be connected to the beam or the ground.

The profile suspended from the roof allows you to hang different types of spotlights or suspensions. With the same track, you will probably be able to illuminate all the substantial parts of the room. The fixed on the beams or on the ground is less versatile, but it takes up less space, especially if the ceiling is low or it tends to rain a lot.

Light it up with LED strips

Another option is to fix led strips capable of covering the length of the beam and highlighting its direction. They can be placed in the grooves of the beams or create an ad hoc cutout in the wood, which can make the beam look “carved”.

Light up the furniture

A less common way to achieve the desired result is to light through the cabinet. If you have cupboards, wall units, kitchens, or shelves that are not full height, but in any case, higher than 2 m, you can place hidden LEDs that direct the light upwards and easily illuminate the room. vaulted. In any case, it is necessary to light directly near the dining table or the work area with a suspension, a floor lamp, or a similar system.

Illuminate the ceiling from the walls

If you’re not going to touch the beams or attach anything to the ceiling, you can also choose wall lighting. There are sconces on the market that direct the light upwards, those that direct it up and down, as well as light bars capable of highlighting an entire wall.

These frames usually hide led strips for indirect lighting and are able to create an interesting scenography even when positioned high up, close to the connection between the beam and the wall.

In addition to picture frames, there are lights in the form of a ribbon of light to light up large spaces characterized by high ceilings, trusses, vaulted ceilings, or paintings. Thanks to the joints on the wall brackets, the light strip can be easily oriented to direct the light to specific points. These types are very modern and can give a particular, super chic look to your surroundings. Remember that a well-designed system will include general ambient lighting (indirect, semi-indirect, and diffuse); localized utility lighting (direct or semi-indirect depending on the case); and specific and decorative lighting (direct). Don’t leave anything out!

Leave a Comment